噴砂（丸）房系列產品

船舶分段涂裝房-船舶特涂設備

Ship section coating room-special ship coating equipment

1、一套強制性涂裝施工規范；目的是保護海洋環境；一次、二次處理Sa2.5級；一種保證涂層目標使用壽命15年施工技術。

2、（邊緣園角）2mm；涂層破壞大于2%或25m2,噴砂處理Sa2.5級。

3、（粗糙度）30-75um；表面溫度比露點高3℃；干膜厚度320um。

4、（顆粒大?。?/span>3、4、5灰塵分布1級；肉眼可見更小灰塵去除。

5、（氯化鈉）50mg/m2；500總噸船用海水艙；150m長散貨船雙舷側。

6、涂裝技術規格書6要素：產品名稱、涂層材料、施工方法、膜厚范圍、前處理、環境。

7、70%Sa2級（試驗不合格底漆）；合格底漆掃砂或高壓水清洗。

8、（相對濕度）小于85%。

9、90/10規則：90%達到標準值，10%達到標準值的90%。

1.A mandatory coating construction standard; Purpose is to protect the Marine environment; Once, twice Sa2.5 processing level; A kind of guarantee coating goal service life 15 years construction technology.

2.(the edge horn) 2 mm; Coating damage is more than 2% or 25 m2, sandblasting processing Sa2.5 level.

3.(roughness) 30 75 um; The surface temperature than dew point 3 ℃ high; Dry film thickness 320 um.

4.(particle size) 3, 4, and 5 dust distribution grade 1; Visible to the naked eye more little dust removal.

5.(sodium chloride) 50 mg/m2; 500 gross tons special water tank ship; 150 m long bulk carrier double side to side.

6.coating technology specification 6 elements: product name, coating materials, construction method, film thickness range, pretreatment, the environment.

7.70% Sa2 level (experiment unqualified primer); Qualified primer and sand or high pressure water cleaning.

8.(relative humidity) less than 85%.

9.90/10 rule: 90% to 10% of the value standard of 90%.

根據規范要求，我們的服務機會有這些：

1、我們可以認為僅有涂裝房不一定能滿足PSPC規范，沒有涂裝房更不能滿足規范；因此沒有涂裝房的我們可以幫助建設，有涂裝房的我們可以幫助完善。

2、15年使用壽命的規范，可能對其它行業有借鑒作用。

3、環境我們可以做到無污染。

4、Sa2.5級意味著高效噴砂和回收系統的使用和改善。

5、粗糙度控制意味著磨料分離裝置的要求提高了（保存細顆粒，去除粉塵）。

6、溫度、濕度、厚度檢測儀器使用率大大提高。

7、鹽度、清潔度、灰塵檢測大量采購。

8、表面吸塵設備（電動、氣動、防爆）大量使用。

9、涂裝房照明設施可能需要改善，選擇燈具、設計布置、安裝施工。

10、為保證環境限制條件：合理的除塵系統、節能的加熱系統、可靠的除濕系統成為涂裝施工必須設備。

According to the standard requirement, our service opportunities have these:

1.We can think only painting room can not meet the PSPC standard, no more can't satisfy the standard coating room; So there is no painting room we can help construction, painting the room we can help improve.

2.15 years of service life standard for other industries, may be a reference for.

3. we can do no pollution environment.

4.Sa2.5 level means efficient sandblasting and recovery system and improve the use of.

5.Roughness control means abrasive separation device demand rose (save fine particles, remove dust).

6.Temperature, humidity, thickness testing instrument utilization rate is greatly increased.

7.And salinity, cleanness and dust detection in large quantities.

8.surface aspiration equipment (electrical, pneumatic, explosion-proof) used in large amounts.

9.Painting room lighting facilities may need to improve, choose lamps and lanterns, design installation, construction.

10.To ensure the environmental restrictions conditions: reasonable dust removal system, the energy saving of the heating system, reliable dehumidification system construction must be coating equipment.

面對船舶修造行業IMO涂層性能標準(PSPC)的實施，斯特爾機械提供船舶噴砂涂裝設備系統整體解決方案及技術支持，為船舶修造行業設計制造完善的船舶分段噴砂房噴漆房，鋼板拋丸預處理線，舾裝件、艙口蓋等船體部件二次分段涂裝房，壓載艙特涂設備，連續高效噴砂設備及回砂系統設備，精準的砂塵分離裝置，環保節能型除塵設備，大中型真空吸砂設備，組合式除濕機，高效暖風機，移動防爆風機，電動/氣動/防爆型吸塵設備，高壓水清洗設備，溫度、濕度、厚度檢測儀器，鹽度、清潔度、灰塵用檢測設備。

Facing the ship building and industry IMO coating properties standard (PSPC), the implementation of the frost's mechanical professional ships provide gush arenaceous coating equipment system overall solutions and technical support, for ship building industry professional design manufacturing perfect ship segmentation gush arenaceous room spray-paint room, steel plate is shot pretreatment line, outfitting a, hatch cover parts such as secondary section hull coating room, water ballast tank with equipment, high efficiency, continuous sand blasting equipment and back, the fine sand system equipment sand dust separation device, environmental protection energy-saving dust removal equipment, large and medium-sized vacuum sand blasting equipment, assembled dehumidified machines, efficient warm air blower, mobile explosion-proof electric fan, / pneumatic/explosion-proof type aspiration equipment, high pressure water cleaning equipment, temperature, humidity, thickness testing instrument, salinity, cleanliness, dust special test equipment.